2017 Exmark Lazer Z S-Series LZS801GKA604A1

Selling Price -

$4,999.00

Information

2017 Exmark Lazer Z S-Series LZS801GKA604A1

More power. More features. More productivity.

With the S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:
  • Doing More With Propane

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.

  • Less Time At The Pump

Gas-powered S-Series models have a single 12-gallon tank with one fill location.

  • Built to Last

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

  • On-Board Diagnostics

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

  • Fewer Grease Points

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

  • Ultracut Series 4 Deck

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

  • Tool-less Belt Removal

Deck and hydro belt can be installed without using any tools.

Photos

Highlights

  • $4,999.00
  • 1491 S LAPEER RD
  • Pre-Owned
  • 05109640
  • 2017
  • Exmark
  • Lazer Z S-Series LZS801GKA604A1
  • 405109640
  • RED
  • FX801V
  • Gas Carbureted | Fuel Indicator: electronic Sender
  • Available
  • 72.8 in. (184.9 cm) | Cutting Deck: 60"
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.

    • Specifications

    • 2017
    • Exmark
    • Lazer Z S-Series
    • LZS801GKA604A1
    • Riding
    • FX801V
    • Kawasaki® | V-Twin
    • Carbureted
    • 3,750 rpm | Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
    • 852 cc.
    • Heavy-duty canister air filtration system
    • Gas Carbureted | Fuel Indicator: electronic Sender
    • 83.1 in. (211.1 cm)
    • 72.8 in. (184.9 cm) | Cutting Deck: 60"
    • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
    • Deck: 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
    • 3 Blades at 20.50" Length | Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
    • Blade Tip Speed: Approximately 18,500 fpm.
    • MagStop electromagnetic 200-ft-lb clutch with spot brake
    • 12-volt battery with 15-amp alternator.
    • Lever-actuated disc brake.
    • Hydro-Drive | Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
    • Allows unit movement without engine running.
    • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
    • Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
    • Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
    • 12-gallon (45.4-L), single fuel tank with single fill location.
    • 24 x 12-12, 4 ply Turf Master®
    • 24 x 12-12, 4 ply Turf Master®
    • .50" thick caster yoke arms. | Front Caster Tires: 13 x 6.5-6, smooth-tread, semi-pneumatic.
    • 1197 lbs.
    • Carb Compliant: No | Cup Holder | 2-post foldable ROPS standard with seat belt and latch.
    • Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
    • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.